Budbuilt Crossmembers
For 79 to 95 pickups and 4Runners
BudBuilt
Low Profile Crossmembers
are formed of 3/8" thick, laser cut, hot rolled, pickled and
oiled steel, and offer almost 2.5" more ground clearance than
stock. They utilize the stock Toyota rubber mounts and direct any
impact with rocks to your frame, not your transmission. The top
surface matches the top surface of the stock crossmember so there are
no interference surprises when installing. Flat head metric screws are
included that attach the stock rubber transfer case mount or mounts.
The stock 12mm head bolts are discarded. Skidplate is formed of 3/16" laser cut, hot rolled, pickled
and oiled steel and bolts on with flathead metric screws ( included)
for a smooth, snag free bottom. This gives 9/16" of steel under
much of your transmission and transfer case for strength and
protection. Screws are provided for attaching the skidplate are metric
grade 10.9 for high strength and resistance to rock abrasion. Comes
with hi grip 5mm Allen wrench too. Parts are supplied as bare steel
with edges and flat surfaces sanded and ready for paint. NO
sharp edges and unfinished laser cuts to hurt you while working under
your truck! :)
If you have a body lift on your truck, they can be made to raise
the transmission and transfer case if
desired, but not required. No additional cost for DRIVETRAIN
LIFT. Just ask
about it when you call!BudBuilt
is the originator of the flat
plate crossmember. Beware of imitators that allow your stock
mount to hang below the crossmember and catch on rocks. Also,
watch for extra large holes that allow easy trans and tcase oil
changes BUT also allow you to catch on all the rocks! How often
do you change those fluids? Are 4 or 6 screws too much to remove
for the extra security and totally flat bottom? We offer them
too, but don't recommend them.
 |
Crossmembers and
skidplates are stocked in completed and also un-bent form, so
shipment is quick, even for those with drivetrain lift. |
Note: All low profile crossmembers must use a low profile
drain plug. You can purchase these from your local Toyota dealer. Here
are the part numbers you will need:
90341-18021 Plug w/magnet
90430-18008 Gasket, tranny/transfer
We can supply these too: $4 for the plug and one gasket.
Single case crossmembers
Dual case crossmembers
Triple case crossmembers ON
SALE for $259!!! Regularly $309
 
|
