Toyota
Frames & Accessories


  Home
  Ordering Info
  Contact Us
  About Us
 
  Products
  Apparel
  Crossmembers
  Frames
  IFS skidplates
  Shackles
  Shock Mounts
  Spring Hangers
  Tie Rods & Draglinks
  Traction Bars
  Winch Plates
  York Comp Brackets
 

  Builders Components
  Tacoma parts
  T100/Tundra parts
  Land Cruiser parts
 

  Scratch/Dent
  Used Parts
  Coming Soon
  Installation Info
 

  Project Vehicles
  Wheeling Pictures
  Sponsored Rigs 


Purchase with 
     
         
 

Landcruiser

Traction Bars

This is just what those nice soft springs of yours are screaming for! This is a completely bolt on 2 link traction bar, for your leaf sprung Toyota truck. It bolts on to the third member and axle housing using longer supplied high tensile strength studs. The front mount clamps onto the horsecollar crossmember with no drilling or welding required. High quality heavy duty teflon filled heim joint, beefy Poly ends and hardware are used to give solid attachment and connection. 2 link design allows for extreme flex of the axle with no binding or associated breakage.  Made of 3/8" thick laser cut steel, 1.25" .120" wall DOM tubing with chrome moly threaded bungs welded in.  Available in several versions:

79-95 trucks and 84-89 4Runners  $399

- 8" differentials, 4 cyl., V6 and Turbo.  Left side and right side mounting available.

- 8" TRD electric locker converted.  Left side and right side mounting available.

IFS Skidplates

 

$279 for '86 to '95 truck 

We have IFS skid plates and belly pans for your '86 to '95 truck or 4Runner!  The front skidplate is made of 3/16" steel, and laser cut.  It has our logo laser etched into it.  It covers from the front bumper to the rear of the a arms.  It bolts under where the stock front bumper mounts and to the stock tapped holes in the bottom.  There are an additional 2 holes that can be used next to the existing ones in the lower crossmember.  There are holes in the rear for attaching it to the optional belly pan.

Can be made for common IFS drop bracket type lifts too. $309

Bolt On Traction Bars

NOTE: Most parts are supplied as bare steel, ready for you to paint the color of your choice. They are sanded, and prepped, usually just needing a final wipe down with solvent before applying paint. This helps keep the cost of the parts lower and allows you to fully customize your rig as you want it. Just want you to know!

powdercoat colors.JPG (41455 bytes)

Powdercoating: Powdercoating now available on all products, any color. Adds approximately 1 week to delivery times. Contact us for pricing.


 

 
(since 3/24/08)