Replaces both stock thin sheet metal skids with 3/16" thick LASER cut steel, CNC press brake formed beef!  4 pieces bolt on to existing mounting points with no welding or fabricating required.  Recessed, flat head and carriage bolts give a nice smooth bottom.  Only a small drain hole for changing oil interrupts that smooth surface.  Rocks, stumps, and lesser vehicles have nothing to catch on.  Edges are formed for strength and rigidity with gaps to allow for ease of cleaning and mud removal.  

$725 for the 4 piece combo! 

Front $289, mid $249, tcase $239, crossmember $99 separately 

Powdercoating adds $199 for the set.

$900 Combo price for all 5 pieces! 

gas tank skid $229 ( if purchased separately )

Powdercoating adds $249 for the set.

Please Note:  If you do not have a stock skid plate already, you will need these band sub-assemblies from Toyota. They are part numbers
77602-04020
77601-04020
You will also need 4 nuts for these.  They are part number
90179-08241

These skids include a spacer to keep the skids off the stock low hanging exhaust crossover.  If you re-route the exhaust or use an aftermarket Y pipe, you can eliminate the spacer and gain an extra INCH of ground clearance!

Dual Case skid plates available too!  Can use these with a single case now and be prepared for the future.  Adds $59 to either package price.

_______________________________________________________________________________________________