Replaces both stock thin sheet metal skids with 3/16" thick LASER cut
steel, CNC press brake formed beef! 4 pieces bolt on to existing
mounting points with no welding or fabricating required.
Recessed, flat head and carriage bolts give a nice smooth
bottom. Only a small drain hole for changing
oil interrupts that smooth surface. Rocks, stumps, and lesser
vehicles have nothing to catch on. Edges are formed for strength
and rigidity with gaps to allow for ease of cleaning and mud
$725 for the 4 piece
$289, mid $249, tcase $239, crossmember $99 separately
adds $199 for the set.
price for all 5 pieces!
gas tank skid $229
( if purchased
adds $249 for the set.
Note: If you do not have a stock skid plate already, you will
need these band sub-assemblies from Toyota. They are part numbers
You will also need 4 nuts for these. They are part number
These skids include a
spacer to keep the skids off the stock low hanging exhaust
crossover. If you re-route the exhaust or use an aftermarket Y
pipe, you can eliminate the spacer and gain an extra INCH of ground
Case skid plates available too! Can use these with a single
case now and be prepared for the future. Adds $59 to either